Heavy Duty Castors Wheels, Industrial Castor Wheels, Casters Wheels India

Albion casters and wheels are designed for any type of load requirement and application in almost all industries from furniture wheels, industrial casters in light duty, medium duty and heavy and extra heavy duty casters. Albion casters are also custom engineered and made as per exacting specifications.

Albion casters offer wide ranging products including:

  • Light duty casters
  • Stainless steel casters
  • Medium duty casters
  • Pneumatic casters
  • Heavy duty casters
  • Shock absorbing casters
  • Kingpinless casters

Albion wheels excels in rollability and includes:

  • Antimicrobial wheels
  • Phenolic wheels
  • Metal wheels
  • Polypropylene wheels
  • Semi & Pneumatic wheels
  • Polyurethane wheels
  • Nylon wheels
  • Rubber Tread wheels
albion
Heavy Duty Castors Wheels

02 SERIES

  • 350LBS
  • 3" TO 5"

DESCRIPTION

Easy rolling, double ball bearing casters are ideally suited for virtually any operation where a smooth, highly maneuverable caster is required. Heat treated design delivers extended life and performance.

  • Top Plate & Yoke: Heavily embossed, formed steel to extend caster life under rugged conditions
  • Swivel Section: Heat treated double ball bearing raceways to resist wear and improve maneuverability
  • Kingpin: 1/2" hydraulically formed steel rivet
  • Axle: 3/8" diameter hollow axle with lock nut
  • Finish: All rigs are zinc plated to resist rust and corrosion
  • NSF Listed for food service industry, consult factory
  • Alternate or custom caster configurations available

04 SERIES

  • 350LBS
  • 3" TO 5"

DESCRIPTION

These polished stainless steel casters are designed for light-duty applications where frequent washdowns are necessary. Ideally suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which could cause rust or corrosion.

  • Top Plate & Yoke: Heavily embossed, Type 304 formed stainless steel to extend caster life under rugged conditions
  • Swivel Section: Double stainless steel ball bearing raceways to resist wear and improve maneuverability
  • Finish: “Polished” stainless steel finish maintains appearance in severe conditions
  • Kingpin: 1/2” hydraulically formed stainless steel rivet
  • Axle: 3/8” diameter Type 304 stainless steel solid axle with lock nut
  • Component Parts: Bushing, axle and nut are all stainless steel
  • NSF: Listed for food service industry
  • Alternate or custom caster configurations available
Industrial Castor Wheels

DC SERIES CASTORS

  • 350LBS
  • 3" TO 5"

DESCRIPTION

An ideal solution for dolly applications; the DC Dolly lineup is both economical and durable. All wheels are non-marking, and the XS wheels feature interlocking thread guards to protect them from entangling debris.

  • Swivel Section: Double ball raceway for standard top plate (Single ball raceway for optional S01 top plate)
  • Finish: Zinc plated finish
  • Thread Guards: Interlocking thread guards standard on XS models, keeping out entangling debris for longer life
  • Construction: Riveted construction
  • Alternate or custom caster configurations available
E5-Series-Casters

E 5 SERIES

  • 900LBS
  • 4" TO 8"

DESCRIPTION

The E-line is an economical lineup of casters and wheels designed and mass-produced for a range of medium duty applications with load requirements ranging from 300 to 1,250 lbs. per caster. From shop carts and containers, to platform and lumber carts – the E-Line is your most competitive and in-stock 2” wide solution.

  • Top Plate & Yoke Base: Cold formed from 1/4” steel plate. Yoke base is notched for factory or fieldinstallable 4-position swivel lock
  • Swivel Section: Double ball raceways for smooth swiveling action
  • Fork Legs: 1/4" thick steel leg construction on swivel and rigidcasters ... 3/16" construction on total lock casters
  • Kingpin: 5/8" diameter permanent rivet kingpin
  • Axle: 1/2" hollow axle with grease zerk and lock nut
  • Wheel seals: Nylon seal retaining/thrust washers
  • RoHS: RoHS compliant industrial zinc finish for corrosion resistance
  • Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle on straight roller and Delrin bearing wheels
  • NSF: Select models
  • Thread Guards: Select models have thread guard option
Series-Casters

05 SERIES

  • 1200LBS
  • 4" TO 8"

DESCRIPTION

This caster is the ideal solution for applications where frequent washdowns are necessary. The stainless steel caster is also well suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which could cause rust.

  • Top Plate & Yoke: Formed from superior 1/4” Type 304 stainless steel plate
  • Finish: Highly polished stainless steel
  • Swivel Section: Double stainless steel ball bearing raceways formed smooth for ease of swiveling
  • King Pin: Stainless steel rivet
  • Axle: 1/2” diameter, stainless steel hollow with roller bearing. Solid axle with Delrin and precision ball bearings
  • Legs: 1/4” stainless steel formed for added strength welded to the yoke base
  • Spanner Bushing: Type 304 Stainless Steel
  • Zerk Fitting: Type 304 Stainless Steel
  • NSF Consult factory
  • Alternate or custom caster configu- rations available
Casters Wheels

11 SERIES

  • 900LBS
  • 4" TO 8"
Industrial Castor Wheels

16 SERIES

  • 1250LBS
  • 4" TO 8"

DESCRIPTION

The 16 Series features a quality USA made rig and 3-year warranty, along with the most wheel and brake options in the industry. This quality lineup provides lasting value, all at a competitive price.

  • All caster rigs and many wheels now made in the USA
  • 3 Year warranty
  • New upper/Lower Raceway Rubber seals: Optional rubber swivel raceway seals help protect casters
  • Improved zinc plated finish for attractive appearance, better corrosion resistance and longer caster life
  • Bigger kingpin: New bigger, stronger 3/4” kingpin on standard top plate
  • Top Plate & Yoke Base: Cold formed from 1/4” steel plate. Yoke base is notched for factory or field-installable 4-position swivel lock
  • Swivel Section: Smooth formed, hardened double ball bearing raceways minimize ball indentation and wear
  • Fork Legs: 1/4” steel, formed to increase strength and welded to yoke base
  • Axle: 1/2” diameter hollow axle complete with lock nut with straight roller and Delrin bearings. Axle is solid with ball, plain bore, and Oilex bearings
  • Wheel seals: Nylon seal retaining/ thrust washers
  • Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle on straight roller and Delrin bearing wheels
  • Alternate or custom caster configurations available
Heavy Duty Castors

60 SERIES

  • 1400LBS
  • 4" TO 8"
Casters Wheels India

62 SERIES

  • 1600LBS
  • 4" TO 8"

DESCRIPTION

Manufactured from cold formed steel, this popular seriesfeatures a heat treated king bolt and nut, ensuring durability and a longer caster life.

  • Top Plate: Cold formed from 1/4” steel plate to provide the strongest possible section for swivel bearing
  • Swivel Section: 3-1/4” diameter load race. Raceways are coined smooth then heat treated to minimize ball indentation and wear
  • Legs: 1/4” steel formed to increase strength and welded to the yoke base
  • King bolt: 3/4” heat treated king bolt and nut assembly
  • Axle: 1/2” diameter hollow axle with recessed zerk fitting and lock nut on straight roller and Delrin bearing.
  • Solid axle on ball and Oilex bearings.
  • Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle with straight roller bearing wheels
  • Finish: All rigs are zinc plated to resist corrosion and rust
  • Notched Yoke Base: Notched to accommodate swivel lock
  • Alternate or custom caster configurations available
Industrial Castor

170 SERIES

  • 1500LBS
  • 4" TO 8"

DESCRIPTION

One year standard warranty. Ideal for economical applications where kingpin casters will not simply hold up to shock or impact. Also see our 3 year warranty offering, the 110 Series.

  • Top Plate: 5/16” AISI 1045 steel
  • Yoke Base: Notched AISI 1045 steel
  • Swivel Section: One row of 3/8” ball bearings are mounted in a precision machined 2-3/8” diameter raceway. Zerk in swivel section
  • Axle: 1/2” diameter hollow axle with zerk fitting on roller and tapered bearing models (Solid axle on Delrin, precision ball, and Oilex models)
  • Finish: Zinc plating.
  • Alternate or custom caster configurations available
Castors Wheels

110 SERIES

  • 1800LBS
  • 4" TO 8"

DESCRIPTION

Precision raceways and fully heat treated construction make the 110 Series the ideal solution for applications exposed to rugged conditions or high amounts of impact and shock. More durable than competitors’ case or induction hardened construction, and longer lasting than conventional kingpin designs

  • 3 Year warranty
  • Top Plate: 5/16” AISI 1045 steel welded and heat treated for longer life
  • Yoke Base: Notched AISI 1045 steel
  • Swivel Section: One row of 3/8" ball bearings mounted in a heat treated precision machined race- way. Zerk in swivel section
  • Axle: 1/2” diameter hollow axle with zerk fitting on roller and tapered bearing models (Solid axle on Delrin, precision ball, and Oilex models)
  • Finish: Zinc plating.
  • Alternate or custom caster configurations available
Casters Wheels

81 SERIES

  • 4100LBS
  • 6" TO 12"

DESCRIPTION

The 81 Series is drop forged and recommended for heavy manual moved loads or for medium duty power drawn equipment. Consult factory for all power drawn applications.

  • Top Plate: Rugged AISI 1045 Drop forged steel for maximum strength
  • Swivel Section: Double ball bearing coined “deep-groove” load and machined component thrust raceways
  • Legs: 3/8” steel, engineered to increase strength and welded construction
  • King Bolt: 3/4” diameter heat treated bolt and nut for enhanced load capacity
  • Axle: 3/4” diameter, hollow, with lock nut
  • Lubrication: Zerk fitting in swivel section and in recessed head of hollow axle
  • Alternate or custom caster configurations available
albion Castors Wheels

310 SERIES

  • 4100LBS
  • 6" TO 12"

DESCRIPTION

Constructed from high quality, heat treated AISI 1045 lasercut steel. Precision machined raceway, fully welded legs (inside and outside), and kingpinless design delivers superior strength in rugged applications.

  • New laser cut steel construction
  • 3 Year warranty
  • Top Plate: 5/16" AISI 1045 heat treated steel welded inside and out for longer life
  • Swivel Section: One row of 1/2" ball bearings mounted in a heat treated precision machined raceway. Zerk in swivel section
  • Yoke Base: Notched AISI 1045 steel
  • Legs: 3/8" thick welded inside and out
  • Axle: 3/4" diameter
  • Finish: RoHS Zinc plating, for greater corrosion resistance than paint
  • Alternate or custom caster configurations available
albion Heavy Duty Castors Wheels

90 SERIES

  • 3500LBS
  • 6" TO 12"

DESCRIPTION

Our popular 90 Series is made from AISI 1045 drop forged steel and is highly recommended for rugged heavy duty applications.

  • Swivel Top Plate: AISI 1045 drop forged steel, for strength and reliability
  • Yoke Base: AISI 1045 drop forged steel with machined raceway for extended service life
  • Swivel Load Bearing: 4” diameter deep-grooved load raceway with 1/2” steel balls for better load distribution. The thrust race is 2-5/8” diameter using 3/8” diameter steel balls for increased capacity
  • Legs: 3/8” steel plate welded inside and out for added strength
  • King Bolt: 1” diameter bolt heat treated for extended service
  • Axle: 3/4” and 1” hollow axles are used for wheel bearing lubrication
  • Lubrication: Zerk fitting in yoke base and in wheel hub or recessed in head of hollow axle
  • Alternate or custom caster configurations available
albion Industrial Castor Wheels

410 SERIES

  • 5500LBS
  • 6" TO 12"

DESCRIPTION

Constructed from high quality, heat treated AISI 1045 laser-cut steel. Precision machined raceway, fully welded legs (inside and outside), and kingpinless design delivers superior strength in rugged applications.

  • New laser-cut steel construction
  • 3 Year warranty
  • Top Plate: 3/8" AISI 1045 heat treated steel welded inside and out for longer life
  • Swivel Section: One row of 1/2" ball bearings mounted in a heat treated precision machined raceway. Zerk in swivel section
  • Yoke Base: Notched AISI 1045 steel
  • Legs: 3/8" thick welded inside and out
  • Axle: 3/4” diameter
  • Finish: RoHS Zinc plating, for greater corrosion resistance than paint
  • Alternate or custom caster configurations available